LizardFS linux CookBook¶
Setting DirectIO for your setup¶
In some cases we have experienced that the caching mechanism in some systems may slow down performance significantly. What has helped is switching the caching off and moving to Direct IO which ommits the OS cache and writes directly to the block device underneath.
To enable DirectIO on your installation, you need to update the .lizardfs_tweaks file in the root of your mounted LizardFS. This is done by issuing the following on a mounted filesystem:
echo "DirectIO=true" > .lizardfs_tweaks
You can verify if the setting has changed to true by issuing the following command:
cat .lizardfs_tweaks | grep DirectIO
If you find that this does not improve your performance or in fact, slows it down, you can always change it back by running:
echo "DirectIO=false" > .lizardfs_tweaks
The changes are effective immediately.
The HA system utilised by LizardFS to keep your master servers always alive is called uraft. It has been developed by Sky Technologies Sp. z o.o. and is based on the raft algorithm developed by Diego Ongaro and John Ousterhout.
HA with only 2 masters¶
This is unsupported and only recommended if setup by certified engineering personel.
Since it is a quorum based algorithm we usualy recommend to users to have 1 master and 2 shadow nodes. But there is a way to run your HA with one master, one shadow and a raft only addon on one of your chunkservers. This stub will still run a master server daemon but it will never switch it to active so it can be running anything.
All that is required to switch a node to “non master” mode is setting:
URAFT_ELECTOR_MODE = 1
in the lizardfs-uraft.cfg file. Everything else must be setup like it would be a normale lizardfs-master with uraft node except that the master will never be put into a real master role.
ZFS on Linux¶
ZFS is a high performance 128 bit filesystem developed by SUN Microsystems. We wil show you here the basics how to install it on Linux. For specifics how to finetune, optimize and manage zfs, please consult the links in the seealso part at the end of the ZFS articles. On Linux we use the Open-ZFS way and do not use FUSE to get maximum performance.
Installing ZFS on RHEL/Centos 7¶
To aoid all the licensing discussions (we do not get into that but you can read up on it <here https://www.softwarefreedom.org/resources/2016/ linux-kernel-cddl.html>_ if you like) the Open-ZFS project has a way where you while installing the driver compile it yourself and that way get around all the license discussions for binary modules it seems. So here we go:
You will require to add the epel repository to your system:
$ yum install epel-release $ yum update
And than the open-zfs project repository:
$ yum localinstall -y --nogpgcheck http://archive.zfsonlinux.org/epel/zfs-release.el7.noarch.rpm
after which you can install the sources required and automativaly build the required modules on your system:
yum install -y kernel-devel zfs
Test if your installation worked:
modprobe zfs lsmod | zfs
Test if you can use the zfs commands:
zfs list zpool list
Now you can install zpools and flesystems with ZFS.
- A guide to install and use zfs on centos 7
- The Open-ZFS Project
- ZFS Manual in the FreeBSD Handbook
- The ZFS On Linux - ZOL project supplies packages and documentation for every major distro: ZFS On Linux - ZOL
- ZFS in the Ubuntu Wiki
- How to install and use ZFS on Ubuntu and why you’d wnat to
- An extensive Guide about ZFS on Debian by Aaron Toponce
- Performance tuning instructions from the Open-ZFS Project